ILoveToCreate Teen Crafts: Sparkle and Shimmy Earrings
Margot Potter for ILoveToCreate
“Mom crafted, kid approved.”
Avalon just got her ears pierced this year, so it will be a while before she can wear anything that swings and dangles. Still she’s been observing my jewelry box with a glint in her eye. Teens love bold jewelry and these earrings fit the bill.
These feature the new Katiedids™ components my friend Katie Hacker created for Beadalon. They have empty chambers that can be filled with a variety of items. I don’t know why I thought wired tinsel when I saw these, but Aleene’s Platinum Bond Glass and Bead adhesive made quick work of this project. You can whip these puppies up in twenty minutes or less, which is the perfect project if you’re an impatient crafter like me! Try filling the chamber with fibers, crystal chain, regular chain, gemstone chips...just be sure you thread the head pin through so you can turn them into fun jewelry components.
Materials
Aleene’s Platinum Bond Glass and Bead Adhesive
4 Katiedids™ 1” open center circles
2 10mm black faux pearls
2 10mm acid green moonglow Lucite rounds
Wire sparkly tinsel
2 silver plated or sterling ear wires
4 thin gauge silver plated or sterling head pins
Tools
Wire cutters
Round nose pliers
Chain nose pliers
1. Cut tinsel to fit half of chamber. Repeat four times.
2. Thread the wire through the holes in the edge of the components and the center bead and back through.
For the green beads, you need to leave equal amounts of wire exposed on both sides, for the black beads bring the head pin flush to the bottom of the component.
3. Place a thread of glue into one of the components. Gently place tinsel into glue, compressing into chamber on either side of center head pin, repeat with second piece of tinsel. Repeat for all four components. Allow glue to dry.
4. Use round nose pliers to create loops at the top and bottom of both green bead components. Bend wire flush to component at a 90 degree angle, grasp wire end with round nose pliers and form a loop. Cut off excess wire with wire cutters.
5. Use round nose pliers to create wrapped loops at the top of the two pearl components. See my YouTube Channel for a video on how to do this.
6. Attach pearl components to the bottom of each green component. Attach the ear wires. Adjust loops so earrings hang properly.
